IOT400-0T3B1 NB-IoT LPWA Data Logger
  • New!

IOT400-0T3B1 NB-IoT LPWA Data Logger

The IOT400 is a cost-effective low complexity solution for simple data acquisition and wireless telemetry. Cat.M1/NB-IoT is optimized for low bandwidth IoT traffic and leverages existing 4G infrastructure to transmit data at low data rates. It allows massive deployment of wireless IoT with carrier-level security. Thanks to the power saving technology, the IOT400 has ultra-low power consumption which allows it to operate on a single battery for years. 

Applications: 

  • AMI/AMR: gas, water 
  • Smart Infrastructure: street lighting, parking, waste management 
  • Farming and agriculture 
  • Industrial sensors 
  • Alarms, event triggering

Battery-powered & easy deploy 

  • Battery-powered with heath alert 
  • Ext. power supply opt. for heavy loads 

Ingress Protection (IP65) 

  • Harsh environments, wide to range 
  • Weatherproof design for moist sites 

LPWA technology Cat.M1/NB-IoT 

  • Low power, low data rates 
  • Wide area coverage 

Data acquisition and events 

  • AI/DI/Modbus_RTU for sensors / meters 
  • Logged data storage, scheduled uplink

Contact us for Price!!
sales@zcomax.co.uk
  • Weight
    1.2 kg
  • SKU
    IOT400-0T3B1

Device Interface 

  • 4G Module: 1* LTE-CatM1 / NB-IoT module 
  • Log Storage: 16MB internal storage for data logging 
  • I/O Connector: 2* M16 waterproof connectors with 2-hole cable gland for wiring the required ports to external sensors/meters. 

Available H/W Ports 

  • SIM Slot: 1* nano-SIM (4FF) • Analog Input: 3* AI ports (supports 0-10V / 4-20mA) 
  • Digital Input: 2* DI ports (isolated, supports Pulse Counter, Dry Contact) 
  • Digital Output: 1* DO port (isolated, Non-Relayed Output) 
  • Field Bus: 1* RS485 for Modbus RTU/ASCII 
  • Console Port: 1* RS232 for device configuration 
  • Wake-up Port: 1* internal Reed Switch, and 1 * dedicated DI for external device wake-up triggering. 
  • Power Source : 4000mAh 3.6V Li-SOCL2 battery, or external 5V~12V DC power. 
  • Antenna : 1*internal 2dBi antenna 

WAN & Uplink 

  • WAN: Cellular WAN • Cellular: 3GPP, NB-IoT with PSM supported 
  • Data Transmission: Single Tone - 16.7kbps (UL)/25.5kbps (DL) Multi Tone - 62.5kbps (UL)/25.5kbps (DL) 

Server Access 

  • Protocol: TCP. UDP, MQTT 
  • Data Security: Pre-shared Key Encryption 
  • Connection: By Schedule Plan (by monthly/weekly/daily), By Event 
  • Data Upload: Multiple Server supported for redundancy, Re-trial plan for interrupted connection.

Field Comm. 

  • • Modbus: Master for accessing attached Modbus RTU/ASCII Slaves (Upto to 3 Modbus devices supported) 
  • • Data Logging: By schedule plan (by yearly/monthly/weekly/daily, or per designated minutes)

Administration 

  • • Configuration: Windows Utility, Console CLI; via USB-to-Serial console cable, or Bluetooth wireless 
  • • System: Backup & Restore, Reboot & Reset, SysLog, Upgrade

Environment 

  • • OP/Storage Temp.: -30°C ~ 70°C ; -40°C ~ 85°C
  • • Humidity: 10%~95% (non-condensing) 
  • • Enclosure: Plastic (PC, UL-94V2), Bracket Mount 
  • • Dimension: 105x 75x55mm (Enclosure only); 132x103x55mm (including Cable Gland, Brackets);

Certificate - CE 

  • • Standards & Regulation 
  • • EMI: EN 55032: 2015 +AC: 2016 Class B 
  • • EMS: EN 55024, IEC 61000 
  • • Radio: EN 301 489 
  • * Safety: EN 60950-1, EN 62368-1

Package Accessory 

  • • 1*Device • 1*4000mAh 3.6V Li-SOCL2 Battery (for –DM3B1) 
  • • 2* Cable Tie for fixing battery (for –DM3B1) 
  • • 3* Jumper for AI current mode setting 
  • • 3* Water&dust-proof Stopper

Optional Accessory (separate order required) 

  • • USB-to-Serial Console Cable
  • • Bluetooth Module for wireless Configuration